Dynamic self-retracting lanyard
Dynamic self-retracting lanyards (DSL) are safety devices used for working at height. They work by minimising the fall distance, which in turn reduces the distance taken to dissipate the energy while keeping the forces created to a safe and acceptable level. This ensures that users are protected against falls from height, the injuries resulting from collisions with hazards and the forces exerted by the safety equipment.
A new milestone was achieved by SpanSet UK, with their 2016 launch of DSL 2. This delivers a 50% improvement compared to the fall clearance requirements set out in BS EN 355:2002 Personal protective equipment against falls from a height – Energy absorbers.
The product builds upon the original DSL by reducing safe clearance heights even further.
The problems associated with falling relate to both the freefall distance and the arrest distance.
The greater the freefall distance, the longer the arrest distance, but the more likely it is that there will be collisions with obstacles or a surface. Previously, lanyards could only provide the choice of freedom of movement or security, but were incapable of providing the right length for each task that would keep the potential fall to the minimum.
The DSL 2 is suitable in situations where there is low clearance and a lack of overhead anchorages (such as scaffold construction). It retracts exactly like a Fall Arrest Block but can be used as an Energy Absorbing Lanyard, anchored anywhere from below foot level to overhead. As a hybrid of Fall Arrest Blocks and Energy Absorbing Lanyards, the DSL 2 provides a balance in that the risks of stopping too quickly or too slowly are ameliorated.
In testing, the DSL 2 arrested falling completely before a conventional lanyard even became taut. The DSL 2 has been tested for users up to 140 kg.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from constructuon and 50 percent recorded as fall from height.
Solar PV company fined for health and safety failure
Work at height not properly planned and failure to take suitable steps to prevent a fall.
The term value when assessing the viability of developments
Consultation on the compulsory purchase process, compensation reforms and potential removal of hope value.
Trees are part of the history of how places have developed.
The increasing costs of repair and remediation
Highlighted by regulator of social housing, as acceleration plan continues.
Free topic guide on mould in buildings
The new TG 26/2024 published by BSRIA.
Greater control for LAs over private rental selective licensing
A brief explanation of changes with the NRLA response.
Practice costs for architectural technologists
Salary standards and working out what you’re worth.
The Health and Safety Executive at 50
And over 200 years of Operational Safety and Health.
Thermal imaging surveys a brief intro
Thermal Imaging of Buildings; a pocket guide BG 72/2017.
Internally insulating a historical building
An experimental DIY approach using mineral thermal lime plaster.
Tree species selection for green infrastructure: A guide for specifiers.
The future of the Grenfell Tower site
Principles, promises, recommendations and a decision expected in February 2025.